High concentration color masterbatch（Mono-pigment）

Product Introduction:

High-concentration plastic color masterbatches are plastic colorants made from a high proportion of pigments or additives mixed with thermoplastic resins, ensuring good dispersion. The chosen resins provide excellent wetting and dispersion for the colorants and have good compatibility with the materials being colored.

Physical and chemical properties of high concentration plastic masterbatch (wire drawing masterbatch experimental test values):

Material form: round cylinder ￠3×3mm) granular

Color: Various colors, customizable

Melt index: 11.8g/10min (2.16kg/190℃)

Specific gravity: 1.62g/cm3

Melting point: 13℃

Moisture content: ≤0.2%

Solubility: Insoluble in water

Color difference: ≤0.5

Migration resistance:≥ level 5

Color fastness: Blue light test>7, gray light test>4

Environmental protection:

No heavy metals/no allergenic additives (passed EU EN71-3 and RoHS standards)

Product Application：Applicable base materials: PE, PP, etc.

Recommended addition ratio: 3~4%

Packing: 25KG/bag

Storage conditions：Store in a dry, cool environment. Seal the packaging when not in use to prevent contamination and avoid exposure to sunlight and moisture.

Product Application:

High-concentration plastic color masterbatch is suitable for low-end blown film, injection molding, pelletizing, pipe materials, sheet materials, and is a general-purpose black masterbatch for filling.

Appearance : 3.0×3.3mm round irregular black particles

Advantages :

Environmentally friendly, non-toxic, odorless, with a smooth and glossy surface and solid colors that are stable, good toughness, no color spots or color streaks, which not only reduces costs, saves additives, but also decreases pollution in the factory premises.

Usage: Mix evenly with raw materials for production.

Dosage: Recommended dosage is 5%-20% (depending on product characteristics and requirements).